A Dubai Orientation: Dubai's Districts

For a quick guide about Dubai, I have here the districts of the city. Because I only had a day to experience Dubai (there will be another time I am sure, when it is not summer and Ramadan!) I settled to explore where my heart’s desires were leaning towards to, and that is the old part of Dubai. What can I say, I am a full-pledged culture freak and it is important for me to see the remnants of the real Dubai before all these modern-day Disneyland infrastructure was put in place. I however managed to venture out to Jumeirah area and Dubai’s Downtown Centre, so that’s a plus.



Dubai in a nutshell is evolving. The city is a neverending contruction site, a constant work in progress, although it is currently going through a tough time with the financial crisis since the credit crunch (staging a comeback somehow?) and the current political instability in the Gulf Region. So it is just a matter of project, an economic boost, some militant investor willing to throw money in, and time obviously, that the city will have another enclave, or district or better yet, an artificial island.



I found this map in Dubai Mall but couldn’t take a whole shot of it as it it too wide, so I cut them into 3 shots. These are the popular districts of the city and the map goes from left to right:







BUR DUBAI – Dubai’s historical district situated on the Dubai Creek. This is part of Old Dubai where Bastakiya (old Dubai Ruins) is located, the Dubai Creek Walk, Dubai Museum and the Textile Souk.



DEIRA – Dubai’s old financial centre and the old downtown Dubai. It is separated from Bur Dubai by the Dubai Creek. This is where the Gold and Spice Souks are located.



KARAMA – A mixed commercial and residential district, somewhat a Little India and Little Manila because of the high concentration of Indians and Filipinos living in the area. Lots of cheap retail shops here and international food places.



MIRDIFF – A commercial and residential district for the well-to-do.







DOWNTOWN DUBAI – Dubbed as the ‘New Dubai’ and home to the biggest mall in the world, the Dubai Mall and the stunning previously tallest building in the world, the Burj Khalifa (she is indeed very stunning, much stunning than the Petronas Towers in KL, Malaysia), and the biggest dancing fountain as well in the world, the Dubai fountain (bigger than the one in Las Vegas, USA).



INTERNATIONAL CITY – A residential area in the middle of the desert next to Chinatown (construction currently undergoing, it is said that the project includes a Forbidden City).



SATWA – Another of Dubai’s Little India and Little Manila due to the high concentration of Indians and Filipinos living here. I cannot stress this enough... there are so many Indians (and Indian-looking, Pakistani, Bangladeshi?) and Filipinos in Dubai! It’s like everywhere I turn to I bump into an Indian or Filipino.







DUBAI MARINA – Hosts the Jumeirah Beach Walk and is home to the largest concentration of western expatriate. I wanted to go to Madinat Jumeirah after my afternoon tea at the Burj al Arab but did not have the time anymore.



JUMEIRAH – Home to the famous Jumeirah Beach and the Dubai Mosque (northern part). Along this beach you can find the Palm Jumeirah (southern part) and other artificial archipelagos such as The World (not totally completed, project put on hold) and The Universe (project put on hold). Oh, care for a trip around the Universe my dear? It cannot get any crazier than this in Dubai! lol



JEBEL ALI – A new area developed located after the Dubai Marina with equally mind-blowing projects.



So that's it! If you are reading this and have been to Dubai or are from Dubai and I have made some mistakes (or would like to add another district that I have not written), please let me know and I shall correct this entry.



Shukran! Assalaam Alaikum =)

Lara-Karena Kellogg (Bitenieks)

Lara-Karena Kellogg (formerly Lara-Karena Bitenieks) died Monday evening while climbing Mt. Wake in the Alaska Range. Some of you may have known Lara from her years as a climbing ranger and member of our Mt. Rainier search and rescue team. But when it came to friends and social networks, Lara was indeed a power-broker in Seattle. Her loss is greatly affecting many people. Her friends are coming together to sort through the sadness and remember her life.

The NPS released Lara's name after her husband, Chad Kellogg, was notified in China where he was climbing (he is now returning to Seattle). There is a lot more to say about Lara. She was a very close friend and influential force in the way the Mount Rainier climbing program runs today. Lara possessed an amazing amount of style, confidence, independence, and strength.

The Fairbanks Daily Newsminer spoke with her climbing partner Jed Brown for details of the accident, Jed has a detailed narrative about the climb and accident on his website. They were climbing the N.E. Ridge of Mt. Wake. The green dot indicates the high point and the red dot is where the accident occurred. This route has some history. In 1994, two Alaskan climbers fell at nearly the same location during a rappelling accident. We will post a lot more on Lara in the days to come.

Jed Brown provided this picture of Lara from their climb. The Mt. Wake photo was taken by Eamonn Walsh and provided to us by Mark Westman.

GEORGE P. CORKINOS

When my nephew and I proof read the death notice for my father, George P. Corkinos, we both missed that extraneous "r" at first. Everything we have done as a family this past week has been in a collective state of disbelief. It is hard to accept that this man is no longer here with us. Usually when a human reaches the age of 91, people shake their heads and say how sorry they are, but the word shock does not usually come up as it has this week. My father was so vivacious and charming- no one believed he was as old as he was. He had a great run.

His name, of course, was George P. Cokinos. The 'p' is important. There is my cousin, George A. Cokinos, my nephew, George S. Cokinos and and my cousin Mark, who is actually George M. Cokinos. (He has a son named George as well.) That's just off the top of my head. Believe me, I could go on.

My father was out cruising when he fell. He had been in Florida since New Year's Eve, tanning on the roof of his condo every day that the sun shone. The ship was in port in Mexico when he tumbled down the stairs, and he was taken to a hospital in Cozumel, then to one in Fort Lauderdale, but he never recovered.

He went out doing something he loved- traveling with my mother and my sister, tanned and vibrant, but not able to overcome the blow. It is a blow to us all- everyone who knew him- whether it was a brief meeting or a lifetime of friendship, he always made an impact. (I've actually felt sorry for a car salesman in his presence.)

I will be starting a new site as a memorial as some family members have requested. Please send me your memories or stories- pictures, too. (lyndalu@gmail.com) You can get to the site by hitting this link- Big George

My Dad 's life touched a lot of people. He was kind. He was funny. His sense of humor was one of a kind. His special name for me was Gunga Din. "Gunk" for short. What could be funnier than that?

Only about a million stories which I hope to keep adding here and at the new site.

Thanks, Dad. It was a blast.

Grand Portage Bay Ice Dreamscape

The clouds over the bay in front of my house the other night were surreal to say the least. Sometimes you just don't need color in the sunset to have a compelling image. This photo was made at the usual sunset time, but because of the heavy cloud cover the sky was a mix of blue and gray. I walked down to the beach in front of my house and found lots of ice chunks floating around in the waves. If you look closely at this photo you'll see that the small ice chunks are actually floating on a larger sheet of ice that was rocking around in the waves. It was a lot of fun to watch the ice rolling with the motion of the lake.

Storing Water on a City Bike

Many city bikes are made without braze-ons for bottle cages on the frame. This is probably because they don't look right with roadbike-style bottle cages, and manufacturers expect that trips on these bikes will be short anyhow.But what about those of us with longer commutes, especially in the summer heat and humidity? While clamp-on bottle cages exist that can be fitted onto the frame without braze-ons, the shape of the frame can make attaching them challenging and unsightly.






With upright handlebars, it is also not exactly convenient to reach all the way down to the down tube or seat tube for the water bottle. Most seem to prefer alternative solutions.






DIY handlebar setups are popular, and above is the Co-Habitant's somewhat eccentric solution. He modified regular water bottle cages to clamp onto the bars and can have up to two water bottles at his fingertips as he rides. For him this setup works nicely, though others might find it cluttered - particularly on bikes with not a great deal of room in the "cockpit."






A more conventional solution is to install a coffee cup holder, the likes of which several manufacturers are producing now. From what I hear, the quality of these holders varies from one brand to another, and they do not fit all water bottles. But if you get one of the good ones and it does fit your bottle of choice, they can work great.






Personally, I prefer to have as few items attached to my handlebars as possible and would rather carry water in my bag or basket. When I ride a full-sized city bike, I keep a bottle of water in my pannier and keep the pannier unzipped for easy access. When I get thirsty en route, I reach for the water when stopped at a red light, drink, then put the bottle back when done. I don't need to turn around in order to do this and kind of know where it is by feel.






On the Brompton it is easier still, because the Carradice front bag has stiff rider-facing pockets that are the exact size of a small Klean Kanteen bottle. I can reach the bottle, drink from it, and put it back in the pocket without having to stop the bike.Of all the different ways I have carried water on a city bike, I think I prefer this front pocket option most of all.Not only is the water bottle close at hand, butI then easily can take it with me once off the bike without having to carry it in my hand.



Do you feel the need to carry water when riding for transportation? Do you think city bikes should come with provisions for doing so? Please share any clever systems you've come up with as well.

Updated Route Condtions for Mount Rainier

I added some thorough updates to our route condition page. Dan Aylward, Chad Kellogg and Tim Matsui climbed Ptarmigan Ridge last week. Meanwhile, climbing rangers Paul Charlton and Tom "house of" Payne climbed Liberty Ridge, Kautz Glacier and Little Tahoma (all in in one week!!) It seems that the upper mountain is holding together nicely for some of the more technical routes.

Photo by Tim Matsui, Dan Aylward leads into some rock bands low on Ptarmigan Ridge.

Palm Canyon Trail

The Palm Canyon section of Balboa Park. In this picture, I am standing in a grove of king palms (Archnotophoenix cunninghamiana).

Putting in the Glacier Stakes

Good news for climbing this year at Mt. Rainier!

Many of you may have seen the white schedule-40 PVC pipes in various locations on the mountain. These stakes are installed using a steam drill and a big frothing wand to put an 8-9 meter long stake into the snow down past the layer of glacier ice.

When we put the stakes in, the snow depth is measured from last year's late fall layer. This year, all of the way up the Nisqually and even at 11,100' on the Ingraham, we have measured an amount of snow comparable to most years at this time.

This is good news for climbers. Many of the non-standard routes rely on Mt. Rainier's typical snowfall to make the route endure long enough into the summer for climbers to take advantage of the better weather.

The project's aim is to analyze the mass-balance of the Nisqually Glacier. One of the things that we have learned from this project is that the Muir Snowfield at about 9,700 feet has lost about 1 meter of ice each year for the past six years. Many of you may have noticed the rock rib that has been exposed just down from Camp Muir at about 9,700 feet!

The Glacier Monitoring Program is coordinated by the geologist at North Cascades National Park. Many of the Pacific Northwest's glaciers are incorporated into this study. Field crews from North Cascades National Park and Mount Rainier National Park are involved in the project.

You've Got The Cutest Little Baby Face

This one's for Aubi. How cute is this sweet dog? This is one of Jack and Diane's babies. I am so in love with their dogs. Can you see why? Tell Dad that Mom needs a Maltese for her birthday, ok?

The Randonneur Experiment: a Review

Throughout the Spring and Summer of , I collaborated with Royal H. Cycles to create a classic low-trail 650B randonneuring bicycle, then test rode it for 220 miles before it was delivered to the new owner. The project was inspired by Jan Heine, whose championing of this type of bicycle made some of us rabid with curiosity. This review has been long in the works. In parallel I've been preparing an article about the same bike for the Bicycle Quarterly, and needed to make sure that its content did not overlap too much with this write-up. Now that the BQ article is finally finished, I feel that the project is complete and would like to reflect upon it here.



If this is the first you are reading about this bike, then you may want to start here before proceeding:



.Making Sense of Rivendell's vs Bicycle Quarterly's Philosophies

.A Beautiful Experiment

.Lovely Bicycle x Royal H Randonneur

.650B Rivendell Sam Hillborne and Randonneur Compared



The posts above describe how the idea for the bike came about, as well as its construction and features, so I will not cover the same ground again here. At some point in the near future I will also write more aboutthe project itself - what it was like to work together with a framebuilder and what I learned in the process. But here I will describe my impressions of the bicycle itself - particularly the aspects that were novel to me. Of course being involved in the bicycle's design, it would be somewhat absurd to either praise or critique its aesthetics and such. The point of this experiment was to form an impression of how this type of bicycle handles, and that is what I will focus on here.





The Low Trail Mystique



To briefly summarise, the Randonneur is a lugged steel low-trail bicycle with 650Bx42mm tires, fenders, dynamo lighting, front and rear racks, and a handlebar bag - made in the style of the 20th century French constructeurs. "Low-trail" refers to the front-end geometry of a bicycle and it differs from the typical mid/high trail geometry of most roadbikes today. Among classic and vintage bicycle enthusiasts, there is definitely a mystique surrounding the low trail randonneur, and dramatic descriptions of its handling abound - made all the more dramatic, I suspect, by the fact that this type of bicycle is fairly rare and few have actually ridden it. Certainly that was one of the factors that made me want to try it. The other factor was that Jan Heine's description of the bicycle suggested a combination of speed, responsiveness, comfort, and all-terrain capability that I found attractive.



The biggest surprise about the Randonneur once I began to ride it, was how "normal" it felt. Based on all of the things I had heard and read about low-trail handling by the time the bike was ready, I expected to be blown away by a radically different handling, which I would either love or hate. Instead, the bike felt... like a bike! When I mentioned this earlier, some interpreted it as my implying that I was disappointed with the Randonneur. However that is not what I meant to express at all. I simply meant that I did not find low trail handling to be "difficult" or unusual. While the Randonneur did have some interesting handling characteristics, it felt intuitive to ride and I think that my experience of this is important to communicate. It seems to me that the mystique surrounding low-trail geometry needlessly intimidates people.



So what did feel different about the low trail handling, even if I found it within the range of normal? Mainly, it was the way the bicycle behaved on turns. At slow speeds I found that I had to be slightly more active when turning than on other road bikes I'd ridden, to pay more attention to the act of turning if that makes sense. Interestingly, this made tight turns easier as opposed to more difficult: I felt as if I were more in control of the turn. I also noticed that on high speed descents along winding roads it was easier to keep my line of travel along the road's curvature; the Randonneur did not "resist" turning at high speeds as I sometimes feel typical roadbikes do. That said, all of this was rather subtle - at no point did this difference alarm or shock me. I would notice the unique behavior on turns and think "Oh neat, so it wants to do this and not that" - as opposed to feeling as if there was anything wrong. It's a different feeling is all, and I rather liked it.



Another outcome of low trail (though this is not about handling per se) is that it allows even small bicycles with fat tires and fenders to avoid toe overlap without the need for an overly long top tube. For me this is a huge deal, because I strongly dislike toe overlap and I ride small bikes. The fact that low-trail geometry automatically eliminates it as a concern is very appealing.



While yet another aspect of the low trail design is said to be its superior ability to handle a front load, in this respect my experience is unhelpful. I rode the bicycle with and without the medium Berthoud handlebar bag pictured here, and did not notice a significant difference. It felt fine with the bag. It felt fine without. Perhaps this lack of a difference is the point - meaning, you can add a full handlebar bag and the handling remains the same. However, some believe that a low-trail bike is meant to be ridden with a loaded bag at all times and will feel unstable without it. This I did not experience.





Best of Both Worlds?



The Bicycle Quarterly's descriptions of randonneuring bicycles suggest that they are essentially fully equipped, comfortable racers - thus offering the best aspects of touring bikes and racing bikes combined.



For me, the speed of the Randonneur was not quite on par with that of a racing bike (namely, the Seven Axiom I'd tried over the summer). However, the Randonneur was faster than my Sam Hillborne.It was also faster than various vintage roadbikes I've tried.



The weight of the complete bicycle (including bottle cages, MKS Touring pedals and handlebar bag) was around 26lb (for comparison, my Sam Hillborneis 31lb with a similar setup), which is fairly light given all the stuff it is outfitted with, but not racing bike territory. The standard diameter tubing made it easier for me to carry the bike (my hand could close around the top tube, whereas with oversized tubing it cannot), which was much appreciated.



As far as comfort, the Randonneur was the feather bed of bicycles. While I have no complaints at all about the comfort of my Rivendell, the Randonneur felt even better, as well as less fatiguing at the end of a ride. In part this may be due to the flexible, standard diameter tubing. Of course given this lightweight and flexible tubing, bicycles like the Randonneur are not suitable for carrying as much weight as touring bikes.





Notes on Components



I won't go over all of the components this bicycle is fitted with, but would like to highlight the ones that were new to me or made an impression.



As mentioned earlier, I loved the Grand BoisMaes handlebars with their flat ramps and parallel drops. I am addicted to Campagnolo ergo levers at this point, and the Veloce model here (also on my Rivendell) is an economical option that works perfectly well for me. I prefer the Schmidt SON dynamo hub on this bicycle to the Shimano hub on my own bike, and the Edelux headlight is the nicest dynamo light I have tried thus far. The Grand Bois Hetre tires I love so much - both on the Randonneur and on my Rivendell - that I cannot imagine not owning a bike fitted with them. I was impressed with the Nitto lugged stem, truly a work of art. The Berthoud handlebar bag intimidated me somewhat with its beautiful styling, but the multiple sizes it comes in might make it a more convenient alternative to the enormous Ostrich handlebar bag I have on my own bike.



In the process of riding this bike I also discovered that I prefer the men's Berthoud touring saddle to the women's. I never wear skirts on roadbikes anyhow, and the longer nose and slightly narrower saddle feels even better here than the shorter, wider version on my own bike.



I am not certain what I think of cantilever brakes - not just on this bicycle, but in general. On fast descents, both the Randonneur and my own canti Rivendell are rather effortful for me to stop. These brakes are supposed to be very powerful and are the classic brakes to use with this style of bicycle, so I am not sure what the alternatives are. That said, almost everyone I know loves cantis, so I might just be an anomaly (I do have very weak hands).



If I were speccing out this bicycle from scratch today, the one change I would make would be to go with the new Rene Herse crankset (which was not yet available last summer). This would be a more aesthetically appropriate (albeit much pricier) option than the Sugino Alpina crankset we used, and its gearing versatility would have allowed us to use a short-cage rear derailleur for an overall more classic look to the drivetrain. None of this however would change the bike's functionality.



I was quite happy with how the Randonneur worked as a whole, including components and accessories. Nothing rattled loose or malfunctioned in the course of my test rides, which included road and gravel.





Verdict



Based on my experience with the Randonneur, my impression is that this type of bicycle combines some of the best features of road-racing bikes and all-terrain touring bikes, but does not replace either. If I owned this bicycle, I would still want a pure road-racing bike in addition. And for those interested in fully loaded touring, the Randonneur would not be the right choice for carrying that much weight. But for self-supported long distance events, endurance events, recreational and nature rides, and anything involving off-road trails and mixed terrain I believe this would be just the ticket - both for competitive cycling and for pleasure. The standard diameter tubing, wide 650B tires, fast and responsive handling, fenders, lights and moderate luggage make it an option worth considering for those who feel that touring bikes are overbuilt for them, while road/racing bikes are unsuitable for real-world conditions. In my view, the low trail geometry is not nearly as quirky as some suggest, and has the additional benefit of avoiding the dreaded toe overlap.



A question I've been asked a number of times now over email, is whether I plan to get a bicycle like this made for myself and whether I would recommend it to others. The first part of this question is tough to answer, because if I did get a bicycle like this then it would replace my Rivendell - I neither need nor can afford to own two 650B road-to-trail bikes! So I just don't know yet whether I want to go through that upheaval. That said, I do think that a bicycle like the Randonneur is extremely appropriate for my style of riding, for all the reasons described in this review. If I did decide to replace my Rivendell with a lighter and faster bike with the same wide tires and handlebar bag, something like this would be it. As for recommending it to others, I don't even dare go there. We are all so different, and only you can decide whether a bicycle like this is suitable for your needs.





Afterthoughts...



An important aside here, is that when designing a bicycle like this, geometry and tubing choice are crucial. If you decide to have a classic low-trail randonneuringframe built, be sure the builder fully understands your request. It is popular now to refer to all bicycles fitted with fenders, racks, and tires wider than 23mm as "rando bikes," but the bicycle I describe here is a very particular animal and the builder needs to understand that - unless of course you can supply them with the full geometry and specifications. There is now also a number of ready-made randonneuringframes (though none of them fully lugged, as far as I understand) that may be suitable for those reluctant to go custom, including the Box Dog Pelican and the Rawland RSogn.



The length of this review makes me realise just how much information I have stored up about this bicycle. Stay tuned for the write-up about the project itself - including commentary on the framebuilder's work, detailed descriptions of the geometry and all that. And for those interested in the Bicycle Quarterly article (which will contain different content still), look for the Spring issue.



My sincere thanks to everyone involved in this project: Bryan of Royal H. Cycles, Jim A. of Harris Cyclery, and Jim P. the bicycle's owner - as well as to Jan of the Bicycle Quarterly for the inspiration and advice. More pictures here and here!

Skiing Mount Rainier

There is nothing totally new about skiing Mt. Rainier. Sure, it's not done that often, but people do ski and ride it... However, skiing the Wilson Headwall is something special. The recent snowfall is settling nicely in some areas. Climbers-turned-skiers (or are they skiers-turned-climbers?) are making their moves on Rainier's slopes. Ski, board, and snowpack reports are welcome!

As for the internet... this blogger site has its down days... But that's ok, because it's easier to express frustration at an internet site, than say, well... we'll just move on...

A few "climbing instigators" have been sending GREAT route conditions information. I've been trying to dump most of it directly into the blog. But as the amount of information grows, I wonder if it would be easier to have a bullentin board?

Please send me your thoughts? I'm very pleased that you are willing to share their experiences! Everyone REALLY appreciates it!

Image by Sky Sjue, just before he drops down the Wilson Headwall...

Trees at Highland Hammocks Park

While we were at the park, I saw Nathan doing something and couldn't quite figure it out. I snapped a picture first and then asked what he was doing.



He said he was feeling the tree move and when I did the same thing, sure enough you could feel it swaying.



We then talked about all of the cool things to do with trees, and moved to specifically discussing how neat the trees here are.











Next time we visit, I hope to get shots of the giant trees that Auburn calls Jurassic Park trees.



Living the life in sunny Florida!

I'm “Home” for the Holidays...

Greetings from Louisiana! I've made it safely to my destination and will be here through Christmas and New Years. It's not “Home” as in Indiana, but it is “Home” in the sense that my friends welcome me as family (we are, after all, distantly related). Mother Nature has not been very cooperative with the weather since I left Utah so it is quite nice to be “settled” in and out of the elements for a few weeks. I can't thank them enough for allowing me to be a part of their family!



To all of my friends and family scattered around the country, and all of the readers of Kinexxions, I offer you my heartfelt wishes for a Merry Christmas.

Speaking of Saddles

Earlier this week I was visiting Cycle Loft - a local bicycle shop known, among other things, for its extensive fit studio.I will be test riding a few of their bikes this summer, and the staff suggested I undergo a fitting session beforehand. As we were getting started, the fitter - Joel - caught sight of the Selle Anatomica I was riding. He asked whether I wanted to use my own saddle, given how particular it was, or try something new.



Today there are lots of high quality, well thought-out saddle designs on the market, in a variety of materials. The trick is to find one that fits our particular anatomy, position and riding style. For the past two years I've been going back and forth between a Berthoud touring saddle and a Selle Anatomica on my roadbikes. These saddles are as close as I've been able to get to being truly comfortable over long distances. But neither is perfect. SoI decided to keep an open mind and see what the fitter recommended.





To start with, Joel measured my sit bones. This is something I've never had done "professionally" before, so it was pretty exciting. Cycle Loft uses the Specialized "Body Fit" method, which, as I understand it, is comparatively un-intrusive (no pelvic fondling, etc.). But there is a nifty device involved. A stool was brought out with a butt-shaped pillow, upon which I sat as instructed. When I stood up, my sit bones left two clear indentations, which Joel swiftly measured.





The figure was 135mm - considerably narrower than what I thought my sit bone width was based on my DIY measurements (the figure I'd come up with was more like 150mm). But we repeated the process just to make sure and got the same number again - so looks like 135mm it is.



Joel explained that a saddle should be wider than the sit bone width itself. How much wider depends partly on the rider's position and partly on the saddle's shape. As far as the rider's position, the more leaned forward you are, the narrower area of support is needed. That much I'd known. As far as saddle shape, Joel showed me a selection or road/racing saddles and pointed out that on some the sitting surface was flat across, while on others it was rounded, like an arc. For all my careful scrutiny of saddle shapes, this was not a distinction I'd explicitly been aware of before, so I was excited to learn something new. For any given rider, on a rounded saddle the width needs to be greater than on a flat saddle.



According to the fit chart, the saddle width recommended for my sit bones was 155mm minimum. My Berthoud saddle (which is flat) measures 160mm across, and my Selle Anatomica (which is rounded) measures 170mm across. My comfort with both makes sense according to this fit method.





Next, Joel asked what I liked and disliked about the saddles I normally use. I explained that my saddles are fairly wide across the rear, yet have narrow, racing-style noses. The wide rear and narrow nose combination works for me, because this waymy butt feels fully supported but I don't get thigh-rub. Other saddles I've tried tend to be either too narrow or too wide all around, which doesn't work. I also like the feel of suspended leather, compared to other surfaces I've tried.



As far as what I don't like, that is a little trickier to explain. The Berthoud feels a bit too hard, whereas the Selle Anatomica has a bit too much give. And with each, I occasionally - at random times, it seems - feel pressure or pinching in the middle of my "soft tissue." It happens rarely now compared to the problems I used to have, but it does still happen occasionally. We discussed all this in detail, as well as the other saddles I've tried. I described my dislike of gel (I sink into it and feel horrible pressure), my inability to ride Terry saddles (the slots are somehow in the wrong place), and finding the edges of many racing saddles "too sharp" as I pedal.





After taking all of this in, Joel suggested I try the Romin Evo saddle by Specialized (interesting write-up about it here). It had everything I seemed to need: a rounded wide rear (168mm across), a narrow nose, and a firm, but not rock-hard, surface. A channel down the middle and a curved nose were designed to avoid contact with exactly the pressure-prone spots I'd identified. It is not a woman-specific saddle, but then neither are my own. A synthetic saddle made by a big-name manufacturer, it was not what I would normally gravitate toward, but I'd said I would be open minded, and so I would.



The Romin Evo is now fitted on the demo bikeI'm riding. I could not feel it under me on the initial 30 mile ride, but I will withhold judgment until after the follow-up, 100K ride.



But whether this particular saddle wins me over is beside the point. What I appreciated the most was the generally informative conversation with the fitter - who I felt was neutral and knowledgeable when it came to various styles, materials, aesthetics and brands of saddles. I would like to keep learning myself, and at some point to post a comprehensive guide that might be of help to those at a loss for where to start.

Oregon Inlet

While driving home from our trip, we enjoyed the scenery. I started to get emotional as we got closer to OBX. As soon as we hit the first bridge, I yelled out, "We're home".



I got really excited when we hit the Oregon Inlet, because I knew we were really close to home. I think the inlet is so beautiful. Something about the contrast of the blue water with the green and tan grass is just peaceful to me.

It has an interesting history too. From Wikipedia:



Oregon Inlet is an inlet along North Carolina's Outer Banks. It joins the Pamlico Sound with the Atlantic Ocean and separates Bodie Island from Pea Island, which are connected by a 2.5 mile bridge that spans the inlet. As one of the few access points to the ocean along this stretch of coast, Oregon Inlet is a major departure point for charter fishing trips, with a nearby harbor serving as the base for many large boats that travel miles out towards the Gulf Stream almost every day. The area is also home to a U.S. Coast Guard station.



Oregon Inlet was formed when a hurricane lashed the Outer Banks in 1846, separating Bodie Island from Pea Island. One ship that rode out that storm in Pamlico Sound was named the Oregon. After the storm the crew members of this ship were the first to tell those on the mainland about the inlet's formation. Hence, it has been known as Oregon Inlet ever since.

Akin to many other inlets along the Outer Banks, Oregon Inlet moves southward due to drifting sands during tides and storms. It has moved south over two miles since 1846, averaging around 66 feet per year.

It's just beautiful, isn't it?



Living the life in North Carolina!

How I Got My Moser Back...

So I bought my Francesco Moser frame back from the person I sold it to, and built it up as a geared racing bike with modern components... despite having sworn off vintage roadbikes earlier. Yeah, I know. Allow me to provide some context:

I got this 1978 Moser racing frame in Vienna two summers ago, mailed it to myself in the US and built it up as a fixed gear. It rode nicely, but wasn't really suitable for fixed gear conversion with its low bottom bracket and resulting tendency toward pedal strike. Once I got my fixed gear-specific Mercian, I moved the components over and decided to sell the Moser. Building it up as a geared roadbike was not feasible: I would have had to spend a fortune on new wheels and components only to put them on an old steel frame, with no guarantee that I'd like the end result. It seemed wiser to buy a roadbike that I could test ride beforehand.

For what it's worth, I still believe that it is not financially practical for a "civilian" (i.e. a person who is neither a wrenching enthusiast withspare modern groupsets lying around, nor someone withbike industry connections), to take on a project like this. However, I have not really been a "civilian" for some time: I am interested in bikes not only for personal use, but also for the sake of learning and writing about them onLovely Bicycle. And I do at this point have industry connections, as well as readers who are interested in making specific projects happen. All of these factors played a role here.

One of my readers offered to donate some of his used modern Campagnolo components and his old racing wheels if I were willing to experiment with a vintage racing frame. Around the same time, the person who bought the Moser from me built it up (with modern Shimanoparts) and discovered that the bike felt too small for him. Luckily, I'd sold the frame locally. I saw this as a cue to buy it back.

The second-hand components I received were a 9-speed Campagnolo Record drivertrain and levers circa (I believe) 1999 and a Campagnolo Vento wheelset of similar vintage. I already had the headset, stem, handlebars, tires and seatpost among my own spare parts. I bought a new bottom bracket, brake calipers, cable housing and bar tape at Harris Cyclery and they built up the bike for me.

The Moser is now finished, and I've ridden it - but not as extensively as I'd like before writing about it. I am also waiting to put some finishing touches on the bike before I take pictures.Not sure what I will do with this bicycle in the long run. The frame is 33 years old and was raced for years by the original owner. The drivetrain and wheelset are around 10 years old and well-used. Even if my impressions of the reborn bikeare positive, I have concerns about frame/component failure and will need to think about that aspect more carefully. But it is certainly informative to compare this bicycle's handling to the modern roadbikes I have been trying over this past summer and fall. Let's just say I am surprised.

I am glad to have theMoserback; in a number of ways it is an even more unique bicycle than I thought.I hope to share my impressions in the coming week and fingers crossed that it doesn't start snowing in the meantime.Stay tuned, and a huge thank you to everyone who's helped me with this project!

Favourite Cycling Routes

While I ride for transportation on the streets of Cambridge, Somerville, Boston and beyond on a (mostly) daily basis, it is of course physically impossible to photograph myself doing so. But recently the Co-Habitant was with me, and he surprised me by taking some snapshots with his mobile phone. I wanted to share these, because they happen to be of my favourite cycling route.



We cannot always articulate what we like or don't like about cycling in our city. But taking our favourite route as a starting point and examining what is so great about it, can lead us to discover our preferences - as well as our anxieties - when it comes to transportation cycling.



The pictures here document a busy street around the corner from my home that stretches through several neighborhoods along the border of Somerville and Cambridge, winds into MIT territory, and then proceeds directly over the Longfellow Bridgeacross the Charles River, into the center of Boston. It is not a traffic-calmed side-street, but a crowded major road, and it is not especially attractive. And yet, it is my favourite cycling route in the area. It goes on forever, gives me easy access to Boston, and does not make me deal with ambiguous traffic situations.



When cycling in the city, I think it is ambiguity that causes me the most anxiety: left turns from side streets onto busy roads; bicycle lanes that suddenly end; commuter trails that force the cyclist to cross busy intersections without streetlights; roundabouts and stop signs where questions arise about the right of way and I never know whether the car is really letting me go... I could go on. But on this route, none of those things happen. I am basically cycling down an endless avenue, andas long as I abide by street lights, the road will take me where I need to go. This not only eliminates ambiguities, but appeals to my love of the "endless open road." I like knowing that I can get on this road around the corner from my house and end up in downtown Boston, stress-free.



You have probably noticed that this route has a bike lane most of the way. But that is not what I like about it - at least not the lane alone. Unlike most streets with bike lanes in my area, thisone is consistent and logical. At no point does it suddenly end in a dangerous spot, and at no point does it place you in the door zone of parked cars. It even takes you through a curve in the road with a left-turn lane specifically for bikes. The bike lane here functions as a bike lane should in my view - a suggestive marking, similar to a bus lane, that signifies a space on the road where bicycles have priority over motor vehicles. It goes without saying that you must still be vigilant of things like occasional double-parked vehicles, and vehicles making right turns at intersections. But overall, the lane - and specifically its consistency - has the effect of legitimising the presence of bicycle traffic. There are quite a few bicycles passing through, and it is just another lane of traffic. Normal. I do not always feel this way about bike lanes, but on this particular route it seems to me that they really do have this positive effect.



When a cycling route feels comfortable and convenient... well, that is pretty much how it ought to be. Cycling for transportation in the city should not feel as if you are going into battle every day; it should feel like the city you live in is open and accessible to you. This is my favourite route, because it does just that.